Regin
Temperature and humidity transmitter for duct mounting
0…10 V duct transmitter for temperature and relative humidity measurements in air.
Articles
(1 st)-
DTTHTemperature and humidity transmitter- Sensor Interface
- 0-10 V
- Display
- No
- AO
- 3
- Max air velocity
- 20 m/s
- Media temp limits
- -40…60 °C
- Insertion length
- 37…195 mm
- Max Overvoltage on any terminal
- +10 V (refereras till GND) V
- Analogue output load impedance 0...10v
- Min. 10 kΩ
- Measuring range, temp
- -40…60 °C
- Output temperature
- 0-10 V
- Output humidity
- 0-10 V
- Sensor element protection, humidity
- Membrane filter, not exchangeable
- Accuracy, humidity 1
- ±2 % RH @ 10...90 % RH
- Accuracy, humidity 2
- ±3 % RH @ 0...10 & 90...100 % RH
- Accuracy, gas in air
- ±(50 ppm + 3 % of the measured value) @ 25 °C
- Warm-up time
- 4min
- Temperature dependance
- 2.5 ppm/K at 0…50 °C
Specifications
| Power Supply | 24VAC/DC (20...28 V AC 50/60Hz / 15...35 V DC), 2.0 VA |
|---|---|
| Protection class | IP65 |
| Ambient humidity (non-condensing) | 0…90 % RH |
| Ambient temperature | -40…60 °C |
| Storage temperature | -40…80 °C |
| Storage humidity | 0...90 % RH |
| Dimensions, external (WxHxD) | 104x212x79 mm |
| Weight, incl. packaging | 0.25 kg |
| Accuracy, temperature | 0,2 K |
| Accuracy, temperature 1 | ±0.2 °K @ 0...60 °C |
| Accuracy, temperature 2 | ±0.8 °K @ -40...0 & >60 °C |
| Measuring range, humidity | 0…100 % RH |
| Response time | <50s |
| Cable gland | M16x1,5 |
| Terminal type | Screw Terminal |
| Terminal wire size | 1.5 mm² |
| Material, housing | Polykarbonat (PC) |
| Material, cover | Polykarbonat (PC) |
| Material, base | ABS |
Software & documentation
Product sheets
Instructions
Product declarations
