RDAS10-230 RDAS 10 Nm
10 Nm, on/off or 3-point, 230 V
Specificaties
| Supply voltage | 230 V AC |
|---|---|
| Power consumption | 6 VA (2 W - Running / 0.9 W - Holding) |
| Cable length | 0.9 m |
| Torque | 10 Nm |
| Control signal | 2-point (on/off)/3-point |
| Running time, actuator | 150 s |
| Auxiliary switch | No |
| Angle limitation | 95 ° |
| Damper shaft, round | 8…16 mm |
| Damper shaft, square | 6…12.8 mm |
| Damper shaft, min shaft length | 20 mm |
| Max damper size (area) | 1.6 m² |
| Appliance class | Class III |
|---|---|
| Protection class | IP54 |
| Ambient humidity (non-condensing) | 0…95 % RH |
| Storage temperature | -32…70 °C |
| Cable nominal cross section | 0.75 mm² |
| Cable length extension, maximum | 300 m |
| Working angle, rotation | 90 ° |
Software en documentatie
Accessoires
Small and compact controller with different types of communication, with or without built-in display. EXOcompact…
- Power Supply
- 24VAC/DC (21...27 V AC 50/60Hz / 20...36 V DC), 4.0 VA
- RS485 ports
- 2
- Ethernet ports
- 1
- Number of I/O
- 20
Small and compact controller with different types of communication, with or without built-in display. EXOcompact…
- Power Supply
- 24VAC/DC (21...27 V AC 50/60Hz / 20...36 V DC), 4.0 VA
- RS485 ports
- 2
- Ethernet ports
- 1
- Number of I/O
- 28
Small and compact controller with different types of communication, with or without built-in display. EXOcompact…
- Power Supply
- 24VAC/DC (21...27 V AC 50/60Hz / 20...36 V DC), 4.0 VA
- RS485 ports
- 2
- Ethernet ports
- 1
- Number of I/O
- 28
Small and compact controller with different types of communication, with or without built-in display. EXOcompact…
- Power Supply
- 24VAC/DC (21...27 V AC 50/60Hz / 20...36 V DC), 4.0 VA
- RS485 ports
- 1
- Ethernet ports
- 1
- Number of I/O
- 15
Small and compact controller with different types of communication, with or without built-in display. EXOcompact…
- Power Supply
- 24VAC/DC (21...27 V AC 50/60Hz / 20...36 V DC), 4.0 VA
- RS485 ports
- 1
- Ethernet ports
- 1
- Number of I/O
- 28
Small and compact controller with different types of communication, with or without built-in display. EXOcompact…
- Power Supply
- 24VAC/DC (21...27 V AC 50/60Hz / 20...36 V DC), 4.0 VA
- RS485 ports
- 2
- Ethernet ports
- 1
- Number of I/O
- 28
Small and compact controller with different types of communication, with or without built-in display. EXOcompact…
- Power Supply
- 24VAC/DC (21...27 V AC 50/60Hz / 20...36 V DC), 4.0 VA
- RS485 ports
- 1
- Ethernet ports
- 1
- Number of I/O
- 28
Small and compact controller with different types of communication, with or without built-in display. EXOcompact…
- Power Supply
- 24VAC/DC (21...27 V AC 50/60Hz / 20...36 V DC), 4.0 VA
- RS485 ports
- 2
- Ethernet ports
- 1
- Number of I/O
- 15
Small and compact controller with different types of communication, with or without built-in display. EXOcompact…
- Power Supply
- 24VAC/DC (21...27 V AC 50/60Hz / 20...36 V DC), 4.0 VA
- RS485 ports
- 1
- Ethernet ports
- 1
- Number of I/O
- 15
Small and compact controller with different types of communication, with or without built-in display. EXOcompact…
- Power Supply
- 24VAC/DC (21...27 V AC 50/60Hz / 20...36 V DC), 4.0 VA
- RS485 ports
- 2
- Ethernet ports
- 1
- Number of I/O
- 15
Regio Midi are controllers with a built-in temperature sensor and an RS485 communication port. Controllers in…
- 3-step fan control
- No
- EC Fan Control
- Yes
- CO2 Sensor
- No
Regio Midi are controllers with a built-in temperature sensor and an RS485 communication port. Controllers in…
- 3-step fan control
- No
- EC Fan Control
- Yes
- CO2 Sensor
- Yes
Regio Midi are controllers with a built-in temperature sensor and an RS485 communication port. Controllers in…
- 3-step fan control
- No
- EC Fan Control
- Yes
- CO2 Sensor
- No
Regio Midi are controllers with a built-in temperature sensor and an RS485 communication port. Controllers in…
- 3-step fan control
- No
- EC Fan Control
- Yes
- CO2 Sensor
- No
Regio Midi are controllers with a built-in temperature sensor and an RS485 communication port. Controllers in…
- 3-step fan control
- No
- EC Fan Control
- Yes
- CO2 Sensor
- No
Regio Midi are controllers with a built-in temperature sensor and an RS485 communication port. Controllers in…
- 3-step fan control
- Yes
- EC Fan Control
- No
- CO2 Sensor
- No
Regio Midi are controllers with a built-in temperature sensor and an RS485 communication port. Controllers in…
- 3-step fan control
- No
- EC Fan Control
- No
- CO2 Sensor
- Yes
Regio Midi are controllers with a built-in temperature sensor and an RS485 communication port. Controllers in…
- 3-step fan control
- No
- EC Fan Control
- Yes
- CO2 Sensor
- No
Regio Midi are controllers with a built-in temperature sensor and an RS485 communication port. Controllers in…
- 3-step fan control
- No
- EC Fan Control
- Yes
- CO2 Sensor
- No
Regio Midi are controllers with a built-in temperature sensor and an RS485 communication port. Controllers in…
- 3-step fan control
- Yes
- EC Fan Control
- No
- CO2 Sensor
- No
Regio Midi are controllers with a built-in temperature sensor and an RS485 communication port. Controllers in…
- 3-step fan control
- No
- EC Fan Control
- Yes
- CO2 Sensor
- Yes
Regio Midi are controllers with a built-in temperature sensor and an RS485 communication port. Controllers in…
- 3-step fan control
- No
- EC Fan Control
- No
- CO2 Sensor
- No
Regio Midi are controllers with a built-in temperature sensor and an RS485 communication port. Controllers in…
- 3-step fan control
- Yes
- EC Fan Control
- No
- CO2 Sensor
- No
Regio Midi are controllers with a built-in temperature sensor and an RS485 communication port. Controllers in…
- 3-step fan control
- No
- EC Fan Control
- No
- CO2 Sensor
- No
Regio Midi are controllers with a built-in temperature sensor and an RS485 communication port. Controllers in…
- 3-step fan control
- No
- EC Fan Control
- Yes
- CO2 Sensor
- No
Regio Midi are controllers with a built-in temperature sensor and an RS485 communication port. Controllers in…
- 3-step fan control
- No
- EC Fan Control
- No
- CO2 Sensor
- No
Regio Midi are controllers with a built-in temperature sensor and an RS485 communication port. Controllers in…
- 3-step fan control
- No
- EC Fan Control
- No
- CO2 Sensor
- No
Regio Midi are controllers with a built-in temperature sensor and an RS485 communication port. Controllers in…
- 3-step fan control
- No
- EC Fan Control
- No
- CO2 Sensor
- Yes
Regio Midi are controllers with a built-in temperature sensor and an RS485 communication port. Controllers in…
- 3-step fan control
- No
- EC Fan Control
- Yes
- CO2 Sensor
- No
- Element type
- PT1000
- Measuring range, temp
- -30…70 °C
- Element type
- NI1000-01
- Measuring range, temp
- -30…70 °C
- Element type
- NTC10-01
- Measuring range, temp
- -30…70 °C
- Power Supply
- 24VAC (20...28 V AC 50Hz / ), 3.5 VA
- RS485 ports
- 1
- Number of I/O
- 16
- Supply voltage
- 24 V AC/DC
- Torque
- 7 Nm
- Control signal
- 2-point (on/off)
- Supply voltage
- 24 V AC/DC
- Torque
- 7 Nm
- Control signal
- 0(2)…10 V DC
- Supply voltage
- 24 V AC/DC
- Torque
- 7 Nm
- Control signal
- 2-point (on/off)
- Supply voltage
- 230 V AC
- Torque
- 7 Nm
- Control signal
- 2-point (on/off)
- Supply voltage
- 230 V AC
- Torque
- 7 Nm
- Control signal
- 2-point (on/off)
The NT04 series employs different types of sensors designed for use with AB Industrietechnik regulators and other…
- Cable length
- 2 m
- Element type
- NI1000-01
- Measuring range, temp
- -50…110 °C
The NT04 series employs different types of sensors designed for use with AB Industrietechnik regulators and other…
- Cable length
- 2 m
- Element type
- NTC10-02
- Measuring range, temp
- -50…110 °C
The NT04 series employs different types of sensors designed for use with AB Industrietechnik regulators and other…
- Cable length
- 2 m
- Element type
- NTC10-03
- Measuring range, temp
- -50…110 °C
The NT04 series employs different types of sensors designed for use with AB Industrietechnik regulators and other…
- Cable length
- 2 m
- Element type
- NTC10-01
- Measuring range, temp
- -50…110 °C
The NT04 series employs different types of sensors designed for use with AB Industrietechnik regulators and other…
- Cable length
- 2 m
- Element type
- NTC1.8
- Measuring range, temp
- -50…110 °C
The NT04 series employs different types of sensors designed for use with AB Industrietechnik regulators and other…
- Cable length
- 2 m
- Element type
- NTC20
- Measuring range, temp
- -50…110 °C
The NT04 series employs different types of sensors designed for use with AB Industrietechnik regulators and other…
- Cable length
- 2 m
- Element type
- NI1000-02
- Measuring range, temp
- -50…110 °C
The NT04 series employs different types of sensors designed for use with AB Industrietechnik regulators and other…
- Cable length
- 2 m
- Element type
- NTC2.2
- Measuring range, temp
- -50…110 °C
Ball valves designed for control of hot, cold or glycol-mixed water in heating and ventilation systems. The valves…
- Actuator connection
- Standard for SEB actuators, or damper actuators with adapter
- Nominal diameter
- DN20
Ball valves designed for control of hot, cold or glycol-mixed water in heating and ventilation systems. The valves…
- Actuator connection
- Standard for SEB actuators, or damper actuators with adapter
- Nominal diameter
- DN15
- Kvs
- 4 m³/h
Ball valves designed for control of hot, cold or glycol-mixed water in heating and ventilation systems. The valves…
- Actuator connection
- Standard for SEB actuators, or damper actuators with adapter
- Nominal diameter
- DN50
Ball valves designed for control of hot, cold or glycol-mixed water in heating and ventilation systems. The valves…
- Actuator connection
- Standard for SEB actuators, or damper actuators with adapter
- Nominal diameter
- DN15
Ball valves designed for control of hot, cold or glycol-mixed water in heating and ventilation systems. The valves…
- Actuator connection
- Standard for SEB actuators, or damper actuators with adapter
- Nominal diameter
- DN40
Ball valves designed for control of hot, cold or glycol-mixed water in heating and ventilation systems. The valves…
- Actuator connection
- Standard for SEB actuators, or damper actuators with adapter
- Nominal diameter
- DN50
Ball valves designed for control of hot, cold or glycol-mixed water in heating and ventilation systems. The valves…
- Actuator connection
- Standard for SEB actuators, or damper actuators with adapter
- Nominal diameter
- DN20
- Kvs
- 6.3 m³/h
Ball valves designed for control of hot, cold or glycol-mixed water in heating and ventilation systems. The valves…
- Actuator connection
- Standard for SEB actuators, or damper actuators with adapter
- Nominal diameter
- DN25
Ball valves designed for control of hot, cold or glycol-mixed water in heating and ventilation systems. The valves…
- Actuator connection
- Standard for SEB actuators, or damper actuators with adapter
- Nominal diameter
- DN25
- Kvs
- 10 m³/h
Ball valves designed for control of hot, cold or glycol-mixed water in heating and ventilation systems. The valves…
- Actuator connection
- Standard for SEB actuators, or damper actuators with adapter
- Nominal diameter
- DN40
- Kvs
- 25 m³/h
Ball valves designed for control of hot, cold or glycol-mixed water in heating and ventilation systems. The valves…
- Actuator connection
- Standard for SEB actuators, or damper actuators with adapter
- Nominal diameter
- DN50
- Kvs
- 40 m³/h
Ball valves designed for control of hot, cold or glycol-mixed water in heating and ventilation systems. The valves…
- Actuator connection
- Standard for SEB actuators, or damper actuators with adapter
- Nominal diameter
- DN50
- Kvs
- 63 m³/h
Ball valves designed for control of hot, cold or glycol-mixed water in heating and ventilation systems. The valves…
- Actuator connection
- Standard for SEB actuators, or damper actuators with adapter
- Nominal diameter
- DN32
Ball valves designed for control of hot, cold or glycol-mixed water in heating and ventilation systems. The valves…
- Actuator connection
- Standard for SEB actuators, or damper actuators with adapter
- Nominal diameter
- DN32
- Kvs
- 16 m³/h
Valve actuator for control of Regin’s range of valves. Available in models with actuator force of 500, 1000, 1800…
- Force
- 500 N
- Supply voltage
- 230 V AC
- Control signal
- 3-point
Valve actuator for control of Regin’s range of valves. Available in models with actuator force of 500, 1000, 1800…
- Force
- 1000 N
- Supply voltage
- 230 V AC
- Control signal
- 3-point
Valve actuator for control of Regin’s range of valves. Available in models with actuator force of 500, 1000, 1800…
- Force
- 1800 N
- Supply voltage
- 230 V AC
- Control signal
- 3-point
Valve actuator for control of Regin’s range of valves. Available in models with actuator force of 500, 1000, 1800…
- Force
- 2500 N
- Supply voltage
- 230 V AC
- Control signal
- 3-point
The RVAZ4 series of valve actuators are easy to mount and have a clear position indication which shows the position…
- Force
- 400 N
- Supply voltage
- 24 V AC/DC
- Control signal
- 0…10 V DC
The RVAZ4 series of valve actuators are easy to mount and have a clear position indication which shows the position…
- Force
- 400 N
- Supply voltage
- 24 V AC/DC
- Control signal
- 0…10 V DC
The RVAZ4 series of valve actuators are easy to mount and have a clear position indication which shows the position…
- Force
- 400 N
- Supply voltage
- 230 V AC
- Control signal
- 3-point
The RVAZ4 series of valve actuators are easy to mount and have a clear position indication which shows the position…
- Force
- 400 N
- Supply voltage
- 24 V AC
- Control signal
- 3-point
The RVAZ4 series of valve actuators are easy to mount and have a clear position indication which shows the position…
- Force
- 400 N
- Supply voltage
- 230 V AC
- Control signal
- 3-point
The RVAZ4 series of valve actuators are easy to mount and have a clear position indication which shows the position…
- Force
- 400 N
- Supply voltage
- 24 V AC
- Control signal
- 3-point
Optical detector with service alarm (max 20 sensors, to be connected to CABV control unit) including 600 mm Venturi…
- Power Supply
- 9...33 V DC (via ABV control unit)
- Wind speed
- Up to 20 m/s
- Smoke alarm
- Red LED
Optical detector with AC power supply and relay output only, with service alarm, including 600 mm Venturi tube.
- Power Supply
- 24 V AC ±15 % for RAC(M) models.
- Wind speed
- Up to 20 m/s
- Smoke alarm
- Red LED
