PCMTV DN32-50 - Pressure independent control valve with measuring ports
Valves intended for systems with multiple or large fan-coil units, chilled beams or air handling units etc., in which pressure independent control valves are preferred. They can be used as constant flow limiters in constant volume systems (without an actuator) or as true PICVs (pressure independent control valves) in variable volume systems (with an actuator).
Navigate on this page
Articles
(4 st)-
PCMTV32-F6- Nominal diameter
- DN32
- Max. flow rate
- 6000 l/h
Max. start up pressure
- 30 kPa
- Connection
- Rc 1 1/4”
- Actuator
- RVASN08
-
PCMTV40-F9
- Nominal diameter
- DN40
- Max. flow rate
- 9000 l/h
Max. start up pressure
- 35 kPa
- Connection
- Rc 1 1/2”
- Actuator
- RVASN08
-
PCMTV50-F12
- Nominal diameter
- DN50
- Max. flow rate
- 12000 l/h
Max. start up pressure
- 35 kPa
- Connection
- Rc 2”
- Actuator
- RVASN08
-
PCMTV50-F18
- Nominal diameter
- DN50
- Max. flow rate
- 18000 l/h
Max. start up pressure
- 35 kPa
- Connection
- Rc 2”
- Actuator
- RVASN08
Specifications
| Pressure class | 16bar |
|---|---|
| Flow characteristics | Equal percentage |
| Rangeability | > 100 : 1 |
| Max. diff. pressure | 600kPa |
| Stroke (°) | 90° |
| Media | Hot water, cold water, glycol-mixed water |
| Max. leakage | 0.01 % of maximum flow, Class IV IEC 60534-4 |
| Media temperature | -10…+120°C |
| Application | Heating systems, cooling systems, fan-coil units, ventilation systems |
| Body | Ductile iron EN-JS1030 |
| Control ball | Brass CW614N |
| Pressure controller | EPDM, stainless steel 1.4305 |
| Pre-setting disc | Brass CW617N |
| Stem | Stainless steel 1.4305 |
| O-rings | EPDM |
