5 Nm, 10 Nm, 20 Nm, 35 Nm

Damper acutators with Modbus RTU communication and without springreturn, 5 Nm, 10 Nm, 20 Nm, 35 Nm

Articles

(4 st)
  • RDAS5-24C - Regin
    RDAS5-24C
    Torque
    5 Nm
    Damper shaft, round
    8…16 mm alt. 8…10 mm (with centering element, included with actuator)
    Damper shaft, square
    6…12.8 mm
    Max. damper size
    0.8 m2
  • RDAS10-24C - Regin
    RDAS10-24C
    Torque
    10 Nm
    Damper shaft, round
    8…16 mm alt. 8…10 mm (with centering element, included with actuator)
    Damper shaft, square
    6…12.8 mm
    Max. damper size
    1.6 m2
  • RDAS20-24C - Regin
    RDAS20-24C
    Torque
    20 Nm
    Damper shaft, round
    8…20.5 mm
    Damper shaft, square
    8…14.5 mm
    Max. damper size
    4 m2
  • RDAS35-24C - Regin
    RDAS35-24C
    Torque
    35 Nm
    Damper shaft, round
    8…25.6 mm
    Damper shaft, square
    6…18 mm
    Max. damper size
    6 m2
Specifications for 5 Nm, 10 Nm, 20 Nm, 35 Nm
Supply voltage 24 V AC/DC (20…28 V AC 50/60 Hz / 24…48 V DC)
Mounting Interior, weather protected
Damper shaft, min. shaft length 20mm
Damper shaft, shaft hardness <300 HV
Working angle, rotation 90°
Angle limitation 95°
Cable length 0.9m
Cable 0.75 mm2
Ambient humidity 0…95 % RH (non-condensing)
Ambient temperature -32…55°C
Storage temperature -32…70°C
Protection class IP54
Control signal Modbus
Protocol Modbus
Port type RS485 (RDAS5–24C and RDAS10–24C have galvanically separated port types)
Number of nodes Max. 32
Address range 1…247 / 255
Default: 255
Transmission format 1-8-E-1 / 1-8-O-1 / 1-8-N-1 / 1-8-N-2
Default: 1-8-E-1
Baud rate Auto / 9.6 / 19.6 / 38.4 / 57.6 / 76.8 / 115.2
Default: Auto
Termination 120 Ω electronically switchable
Default: Off