7 Nm, 18 Nm

Damper acutators with Modbus RTU communication and with springreturn, 7 Nm, 18 Nm

Articles

(2 st)
  • RDAS7S-24C - Regin
    RDAS7S-24C
    Torque
    7 Nm
    Damper shaft, round
    6.4…20.5 mm
    Damper shaft, square
    6.4…12.8 mm
    Max. damper size
    1.5 m2
  • RDAS18S-24C - Regin
    RDAS18S-24C
    Torque
    18 Nm
    Damper shaft, round
    8…25.6 mm
    Damper shaft, square
    6…18 mm
    Max. damper size
    3 m2
Specifications for 7 Nm, 18 Nm
Supply voltage 24 V AC/DC (20…28 V AC 50/60 Hz / 24…48 V DC)
Mounting Interior, weather protected
Damper shaft, min. shaft length 20mm
Damper shaft, shaft hardness <300 HV
Working angle, rotation 90°
Angle limitation 95°
Cable length 0.9m
Cable 0.75 mm2
Ambient humidity 0…95 % RH (non-condensing)
Ambient temperature -32…55°C
Storage temperature -32…70°C
Protection class IP54
Control signal Modbus
Protocol Modbus
Port type RS485 (RDAS5–24C and RDAS10–24C have galvanically separated port types)
Number of nodes Max. 32
Address range 1…247 / 255
Default: 255
Transmission format 1-8-E-1 / 1-8-O-1 / 1-8-N-1 / 1-8-N-2
Default: 1-8-E-1
Baud rate Auto / 9.6 / 19.6 / 38.4 / 57.6 / 76.8 / 115.2
Default: Auto
Termination 120 Ω electronically switchable
Default: Off