Upgrade agreement
This product is discontinued
This product is discontinued
Secured and continuous access to the latest versions of Regin's software at a fixed yearly rate. Regin's upgrade agreement enables you to feel safe in the knowledge that your programs will last you both now and in the future. At least once a year, we will also launch new functions which you can make use of directly.
The agreement applies to the following software
- EXO4
- EXOdesigner
- EXOreport
- continuous access to the latest version of the licensed software
- a full licence for EXOdesigner (even if the customer purchased the software at an earlier point in time)
- anti-theft protection of registered hardware keys (dongle). A stolen hardware key is replaced free of charge.
If a customer without an upgrade agreement wishes to upgrade a software in the future, this is done by buying the software. The agreement is only signed if all the customer's software and hardware key licences are included. The cost is based on the number of hardware keys and the size of the system. Contact Regin for more information.
Articles
(0 st)Software & documentation
Accessories
Small and compact controller with different types of communication, with or without built-in display. EXOcompact…
- Power Supply
- 24VAC/DC (21...27 V AC 50/60Hz / 20...36 V DC), 4.0 VA
- RS485 ports
- 2
- Ethernet ports
- 1
- Number of I/O
- 20
Small and compact controller with different types of communication, with or without built-in display. EXOcompact…
- Power Supply
- 24VAC/DC (21...27 V AC 50/60Hz / 20...36 V DC), 4.0 VA
- RS485 ports
- 2
- Ethernet ports
- 1
- Number of I/O
- 28
Small and compact controller with different types of communication, with or without built-in display. EXOcompact…
- Power Supply
- 24VAC/DC (21...27 V AC 50/60Hz / 20...36 V DC), 4.0 VA
- RS485 ports
- 2
- Ethernet ports
- 1
- Number of I/O
- 28
Small and compact controller with different types of communication, with or without built-in display. EXOcompact…
- Power Supply
- 24VAC/DC (21...27 V AC 50/60Hz / 20...36 V DC), 4.0 VA
- RS485 ports
- 1
- Ethernet ports
- 1
- Number of I/O
- 15
Small and compact controller with different types of communication, with or without built-in display. EXOcompact…
- Power Supply
- 24VAC/DC (21...27 V AC 50/60Hz / 20...36 V DC), 4.0 VA
- RS485 ports
- 1
- Ethernet ports
- 1
- Number of I/O
- 28
Small and compact controller with different types of communication, with or without built-in display. EXOcompact…
- Power Supply
- 24VAC/DC (21...27 V AC 50/60Hz / 20...36 V DC), 4.0 VA
- RS485 ports
- 2
- Ethernet ports
- 1
- Number of I/O
- 28
Small and compact controller with different types of communication, with or without built-in display. EXOcompact…
- Power Supply
- 24VAC/DC (21...27 V AC 50/60Hz / 20...36 V DC), 4.0 VA
- RS485 ports
- 1
- Ethernet ports
- 1
- Number of I/O
- 28
Small and compact controller with different types of communication, with or without built-in display. EXOcompact…
- Power Supply
- 24VAC/DC (21...27 V AC 50/60Hz / 20...36 V DC), 4.0 VA
- RS485 ports
- 2
- Ethernet ports
- 1
- Number of I/O
- 15
Small and compact controller with different types of communication, with or without built-in display. EXOcompact…
- Power Supply
- 24VAC/DC (21...27 V AC 50/60Hz / 20...36 V DC), 4.0 VA
- RS485 ports
- 2
- Ethernet ports
- 1
- Number of I/O
- 15
Small and compact controller with different types of communication, with or without built-in display. EXOcompact…
- Power Supply
- 24VAC/DC (21...27 V AC 50/60Hz / 20...36 V DC), 4.0 VA
- RS485 ports
- 1
- Ethernet ports
- 1
- Number of I/O
- 15
Regio Midi are controllers with a built-in temperature sensor and an RS485 communication port. Controllers in…
- 3-step fan control
- No
- EC Fan Control
- Yes
- CO2 Sensor
- No
Regio Midi are controllers with a built-in temperature sensor and an RS485 communication port. Controllers in…
- 3-step fan control
- No
- EC Fan Control
- Yes
- CO2 Sensor
- Yes
Regio Midi are controllers with a built-in temperature sensor and an RS485 communication port. Controllers in…
- 3-step fan control
- No
- EC Fan Control
- Yes
- CO2 Sensor
- No
Regio Midi are controllers with a built-in temperature sensor and an RS485 communication port. Controllers in…
- 3-step fan control
- No
- EC Fan Control
- Yes
- CO2 Sensor
- No
Regio Midi are controllers with a built-in temperature sensor and an RS485 communication port. Controllers in…
- 3-step fan control
- No
- EC Fan Control
- Yes
- CO2 Sensor
- No
Regio Midi are controllers with a built-in temperature sensor and an RS485 communication port. Controllers in…
- 3-step fan control
- No
- EC Fan Control
- No
- CO2 Sensor
- Yes
Regio Midi are controllers with a built-in temperature sensor and an RS485 communication port. Controllers in…
- 3-step fan control
- Yes
- EC Fan Control
- No
- CO2 Sensor
- No
Regio Midi are controllers with a built-in temperature sensor and an RS485 communication port. Controllers in…
- 3-step fan control
- No
- EC Fan Control
- Yes
- CO2 Sensor
- No
Regio Midi are controllers with a built-in temperature sensor and an RS485 communication port. Controllers in…
- 3-step fan control
- No
- EC Fan Control
- Yes
- CO2 Sensor
- No
Regio Midi are controllers with a built-in temperature sensor and an RS485 communication port. Controllers in…
- 3-step fan control
- Yes
- EC Fan Control
- No
- CO2 Sensor
- No
Regio Midi are controllers with a built-in temperature sensor and an RS485 communication port. Controllers in…
- 3-step fan control
- No
- EC Fan Control
- Yes
- CO2 Sensor
- Yes
Regio Midi are controllers with a built-in temperature sensor and an RS485 communication port. Controllers in…
- 3-step fan control
- No
- EC Fan Control
- No
- CO2 Sensor
- No
Regio Midi are controllers with a built-in temperature sensor and an RS485 communication port. Controllers in…
- 3-step fan control
- Yes
- EC Fan Control
- No
- CO2 Sensor
- No
Regio Midi are controllers with a built-in temperature sensor and an RS485 communication port. Controllers in…
- 3-step fan control
- No
- EC Fan Control
- No
- CO2 Sensor
- No
Regio Midi are controllers with a built-in temperature sensor and an RS485 communication port. Controllers in…
- 3-step fan control
- No
- EC Fan Control
- Yes
- CO2 Sensor
- No
Regio Midi are controllers with a built-in temperature sensor and an RS485 communication port. Controllers in…
- 3-step fan control
- No
- EC Fan Control
- No
- CO2 Sensor
- No
Regio Midi are controllers with a built-in temperature sensor and an RS485 communication port. Controllers in…
- 3-step fan control
- No
- EC Fan Control
- No
- CO2 Sensor
- No
Regio Midi are controllers with a built-in temperature sensor and an RS485 communication port. Controllers in…
- 3-step fan control
- No
- EC Fan Control
- No
- CO2 Sensor
- Yes
Regio Midi are controllers with a built-in temperature sensor and an RS485 communication port. Controllers in…
- 3-step fan control
- No
- EC Fan Control
- Yes
- CO2 Sensor
- No
- Element type
- PT1000
- Measuring range, temp
- -30…70 °C
- Element type
- NI1000-01
- Measuring range, temp
- -30…70 °C
- Element type
- NTC10-01
- Measuring range, temp
- -30…70 °C
- Power Supply
- 24VAC (20...28 V AC 50Hz / ), 3.5 VA
- RS485 ports
- 1
- Number of I/O
- 16
- Supply voltage
- 24 V AC/DC
- Torque
- 7 Nm
- Control signal
- 2-point (on/off)
- Supply voltage
- 24 V AC/DC
- Torque
- 7 Nm
- Control signal
- 0(2)…10 V DC
- Supply voltage
- 24 V AC/DC
- Torque
- 7 Nm
- Control signal
- 2-point (on/off)
- Supply voltage
- 230 V AC
- Torque
- 7 Nm
- Control signal
- 2-point (on/off)
- Supply voltage
- 230 V AC
- Torque
- 7 Nm
- Control signal
- 2-point (on/off)
The NT04 series employs different types of sensors designed for use with AB Industrietechnik regulators and other…
- Cable length
- 2 m
- Element type
- NI1000-01
- Measuring range, temp
- -50…110 °C
The NT04 series employs different types of sensors designed for use with AB Industrietechnik regulators and other…
- Cable length
- 2 m
- Element type
- NTC10-02
- Measuring range, temp
- -50…110 °C
The NT04 series employs different types of sensors designed for use with AB Industrietechnik regulators and other…
- Cable length
- 2 m
- Element type
- NTC10-03
- Measuring range, temp
- -50…110 °C
The NT04 series employs different types of sensors designed for use with AB Industrietechnik regulators and other…
- Cable length
- 2 m
- Element type
- NTC10-01
- Measuring range, temp
- -50…110 °C
The NT04 series employs different types of sensors designed for use with AB Industrietechnik regulators and other…
- Cable length
- 2 m
- Element type
- NTC1.8
- Measuring range, temp
- -50…110 °C
The NT04 series employs different types of sensors designed for use with AB Industrietechnik regulators and other…
- Cable length
- 2 m
- Element type
- NTC20
- Measuring range, temp
- -50…110 °C
The NT04 series employs different types of sensors designed for use with AB Industrietechnik regulators and other…
- Cable length
- 2 m
- Element type
- NI1000-02
- Measuring range, temp
- -50…110 °C
The NT04 series employs different types of sensors designed for use with AB Industrietechnik regulators and other…
- Cable length
- 2 m
- Element type
- NTC2.2
- Measuring range, temp
- -50…110 °C
Ball valves designed for control of hot, cold or glycol-mixed water in heating and ventilation systems. The valves…
- Actuator connection
- Standard for SEB actuators, or damper actuators with adapter
- Nominal diameter
- DN20
Ball valves designed for control of hot, cold or glycol-mixed water in heating and ventilation systems. The valves…
- Actuator connection
- Standard for SEB actuators, or damper actuators with adapter
- Nominal diameter
- DN15
- Kvs
- 4 m³/h
Ball valves designed for control of hot, cold or glycol-mixed water in heating and ventilation systems. The valves…
- Actuator connection
- Standard for SEB actuators, or damper actuators with adapter
- Nominal diameter
- DN50
Ball valves designed for control of hot, cold or glycol-mixed water in heating and ventilation systems. The valves…
- Actuator connection
- Standard for SEB actuators, or damper actuators with adapter
- Nominal diameter
- DN15
Ball valves designed for control of hot, cold or glycol-mixed water in heating and ventilation systems. The valves…
- Actuator connection
- Standard for SEB actuators, or damper actuators with adapter
- Nominal diameter
- DN40
Ball valves designed for control of hot, cold or glycol-mixed water in heating and ventilation systems. The valves…
- Actuator connection
- Standard for SEB actuators, or damper actuators with adapter
- Nominal diameter
- DN50
Ball valves designed for control of hot, cold or glycol-mixed water in heating and ventilation systems. The valves…
- Actuator connection
- Standard for SEB actuators, or damper actuators with adapter
- Nominal diameter
- DN20
- Kvs
- 6.3 m³/h
Ball valves designed for control of hot, cold or glycol-mixed water in heating and ventilation systems. The valves…
- Actuator connection
- Standard for SEB actuators, or damper actuators with adapter
- Nominal diameter
- DN25
Ball valves designed for control of hot, cold or glycol-mixed water in heating and ventilation systems. The valves…
- Actuator connection
- Standard for SEB actuators, or damper actuators with adapter
- Nominal diameter
- DN25
- Kvs
- 10 m³/h
Ball valves designed for control of hot, cold or glycol-mixed water in heating and ventilation systems. The valves…
- Actuator connection
- Standard for SEB actuators, or damper actuators with adapter
- Nominal diameter
- DN40
- Kvs
- 25 m³/h
Ball valves designed for control of hot, cold or glycol-mixed water in heating and ventilation systems. The valves…
- Actuator connection
- Standard for SEB actuators, or damper actuators with adapter
- Nominal diameter
- DN50
- Kvs
- 40 m³/h
Ball valves designed for control of hot, cold or glycol-mixed water in heating and ventilation systems. The valves…
- Actuator connection
- Standard for SEB actuators, or damper actuators with adapter
- Nominal diameter
- DN50
- Kvs
- 63 m³/h
Ball valves designed for control of hot, cold or glycol-mixed water in heating and ventilation systems. The valves…
- Actuator connection
- Standard for SEB actuators, or damper actuators with adapter
- Nominal diameter
- DN32
Ball valves designed for control of hot, cold or glycol-mixed water in heating and ventilation systems. The valves…
- Actuator connection
- Standard for SEB actuators, or damper actuators with adapter
- Nominal diameter
- DN32
- Kvs
- 16 m³/h
Valve actuator for control of Regin’s range of valves. Available in models with actuator force of 500, 1000, 1800…
- Force
- 500 N
- Supply voltage
- 230 V AC
- Control signal
- 3-point
Valve actuator for control of Regin’s range of valves. Available in models with actuator force of 500, 1000, 1800…
- Force
- 1000 N
- Supply voltage
- 230 V AC
- Control signal
- 3-point
Valve actuator for control of Regin’s range of valves. Available in models with actuator force of 500, 1000, 1800…
- Force
- 1800 N
- Supply voltage
- 230 V AC
- Control signal
- 3-point
Valve actuator for control of Regin’s range of valves. Available in models with actuator force of 500, 1000, 1800…
- Force
- 2500 N
- Supply voltage
- 230 V AC
- Control signal
- 3-point
The RVAZ4 series of valve actuators are easy to mount and have a clear position indication which shows the position…
- Force
- 400 N
- Supply voltage
- 24 V AC/DC
- Control signal
- 0…10 V DC
The RVAZ4 series of valve actuators are easy to mount and have a clear position indication which shows the position…
- Force
- 400 N
- Supply voltage
- 24 V AC/DC
- Control signal
- 0…10 V DC
The RVAZ4 series of valve actuators are easy to mount and have a clear position indication which shows the position…
- Force
- 400 N
- Supply voltage
- 230 V AC
- Control signal
- 3-point
The RVAZ4 series of valve actuators are easy to mount and have a clear position indication which shows the position…
- Force
- 400 N
- Supply voltage
- 24 V AC
- Control signal
- 3-point
The RVAZ4 series of valve actuators are easy to mount and have a clear position indication which shows the position…
- Force
- 400 N
- Supply voltage
- 230 V AC
- Control signal
- 3-point
The RVAZ4 series of valve actuators are easy to mount and have a clear position indication which shows the position…
- Force
- 400 N
- Supply voltage
- 24 V AC
- Control signal
- 3-point
Optical detector with service alarm (max 20 sensors, to be connected to CABV control unit) including 600 mm Venturi…
- Power Supply
- 9...33 V DC (via ABV control unit)
- Wind speed
- Up to 20 m/s
- Smoke alarm
- Red LED
Optical detector with AC power supply and relay output only, with service alarm, including 600 mm Venturi tube.
- Power Supply
- 24 V AC ±15 % for RAC(M) models.
- Wind speed
- Up to 20 m/s
- Smoke alarm
- Red LED
