Room Controllers
Categories
Filters
Our products

Regio Midi are controllers with a built-in temperature sensor and an RS485 communication port. Controllers in…
- 3-step fan control
- No
- EC Fan Control
- Yes
- CO2 Sensor
- No

Regio Midi are controllers with a built-in temperature sensor and an RS485 communication port. Controllers in…
- 3-step fan control
- No
- EC Fan Control
- Yes
- CO2 Sensor
- Yes

Regio Midi are controllers with a built-in temperature sensor and an RS485 communication port. Controllers in…
- 3-step fan control
- No
- EC Fan Control
- Yes
- CO2 Sensor
- No

Regio Midi are controllers with a built-in temperature sensor and an RS485 communication port. Controllers in…
- 3-step fan control
- No
- EC Fan Control
- Yes
- CO2 Sensor
- No

Fan-coil controller for EC fans with communication via RS485 (Modbus, BACnet or EXOline)
- Outputs On/Off Valves
- No
- Outputs Thermal/3 point
- Yes
- Outputs 0...10V
- No

Regio Midi are controllers with a built-in temperature sensor and an RS485 communication port. Controllers in…
- 3-step fan control
- No
- EC Fan Control
- Yes
- CO2 Sensor
- No

Regio Midi are controllers with a built-in temperature sensor and an RS485 communication port. Controllers in…
- 3-step fan control
- Yes
- EC Fan Control
- No
- CO2 Sensor
- No

Regio Midi are controllers with a built-in temperature sensor and an RS485 communication port. Controllers in…
- 3-step fan control
- No
- EC Fan Control
- Yes
- CO2 Sensor
- No

Regio Midi are controllers with a built-in temperature sensor and an RS485 communication port. Controllers in…
- 3-step fan control
- No
- EC Fan Control
- No
- CO2 Sensor
- Yes

- Power Supply
- 24VAC (20...28 V AC 50/60Hz / ), 2.0 VA
- Dimensions, external (WxHxD)
- 86x86x30 mm
- AI
- 1

- Outputs On/Off Valves
- No
- Outputs Thermal/3 point
- No
- Outputs 0...10V
- Yes

Electronic thermostats intended for heating or cooling with built-in sensor and input for an external sensor.
- Control signal (output)
- 16A, 230 V AC. change-over relay
- Sensor inputs
- NTC Sensor
- Setpoint
- 0...30 °C