5 Nm, 10 Nm, 20 Nm, 35 Nm
Damper acutators with Modbus RTU communication and without springreturn, 5 Nm, 10 Nm, 20 Nm, 35 Nm
Navigeer op deze pagina
Artikelen
(4 st)-
RDAS5-24C- Torque
- 5 Nm
- Damper shaft, round
- 8…16 mm alt. 8…10 mm (with centering element, included with actuator)
- Damper shaft, square
- 6…12.8 mm
- Max. damper size
- 0.8 m 2
-
RDAS10-24C
- Torque
- 10 Nm
- Damper shaft, round
- 8…16 mm alt. 8…10 mm (with centering element, included with actuator)
- Damper shaft, square
- 6…12.8 mm
- Max. damper size
- 1.6 m 2
-
RDAS20-24C
- Torque
- 20 Nm
- Damper shaft, round
- 8…20.5 mm
- Damper shaft, square
- 8…14.5 mm
- Max. damper size
- 4 m 2
-
RDAS35-24C
- Torque
- 35 Nm
- Damper shaft, round
- 8…25.6 mm
- Damper shaft, square
- 6…18 mm
- Max. damper size
- 6 m 2
Specificaties
| Supply voltage | 24 V AC/DC (20…28 V AC 50/60 Hz / 24…48 V DC) |
|---|---|
| Mounting | Interior, weather protected |
| Damper shaft, min. shaft length | 20mm |
| Damper shaft, shaft hardness | <300 HV |
| Working angle, rotation | 90° |
| Angle limitation | 95° |
| Cable length | 0.9m |
| Cable | 0.75 mm 2 |
| Ambient humidity | 0…95 % RH (non-condensing) |
| Ambient temperature | -32…55°C |
| Storage temperature | -32…70°C |
| Protection class | IP54 |
| Control signal | Modbus |
| Protocol | Modbus |
| Port type | RS485 (RDAS5–24C and RDAS10–24C have galvanically separated port types) |
| Number of nodes | Max. 32 |
| Address range | 1…247 / 255 Default: 255 |
| Transmission format | 1-8-E-1 / 1-8-O-1 / 1-8-N-1 / 1-8-N-2 Default: 1-8-E-1 |
| Baud rate | Auto / 9.6 / 19.6 / 38.4 / 57.6 / 76.8 / 115.2 Default: Auto |
| Termination | 120 Ω electronically switchable Default: Off |