VCA283W-4 Corrigo Ardo 5.0 – configurable 24 V ventilation controller
Corrigo Ardo are controllers for ventilation control that make every step from installation to operation and maintenance easier than ever. Simply connect the controller, enter any settings as desired and start up. It can be used either stand-alone or integrated into a network. It has built-in support for many different languages and is designed for mounting on a DIN-rail or in a cabinet door. It can be connected to CLOUDigo for the possibility to monitor the system from any location.
Navigeer op deze pagina
Specificaties
| Dimensions, external (WxHxD) | 149*121*60 mm |
|---|---|
| Display | No |
| Supported protocols | EXOline, Modbus, BACnet |
| RS485 ports | 2 |
| Ethernet ports | 1 |
| Display ports | 1 |
| AI | 4 |
| UI | 4 |
| DI | 8 |
| CI | 0 |
| AO | 5 |
| UO | 0 |
| DO | 7 |
| Analogue inputs type (AI) | PT1000/Ni1000/Ni1000LG/0-10 V |
| Power Supply | 24VAC/DC (21...27 V AC 50/60Hz / 20...36 V DC), 9.0 VA |
|---|---|
| Battery type | CR2032 replacable Lithium cell |
| Battery life time | 5 years |
| Protection class | IP20 |
| Ambient temp | 0…50 °C |
| Storage temp | -20…70 °C |
| Mounting | DIN-rail |
| Terminal type | Screw Terminal |
| Deteachable terminal | Yes |
| Terminal wire size | 3 mm² |
| Material, housing | Polycarbonate (PC) |
| Material, base | Polycarbonate (PC) |
Software en documentatie
Productblad
Instructies
Handleidingen
Accessoires
External touch display for controllers with web interface
3 m cable for connecting an external display
External display
10 m cable for connecting an external display
Ardo expansion unit with15 I/O:s
Vido expansion unit with 19 I/O:s
Ardo expansion unit with 28 I/O:s
External touch display for Corrigo controllers
External display