Regin
RDAS20-24C 5 Nm, 10 Nm, 20 Nm, 35 Nm
Damper acutators with Modbus RTU communication and without springreturn, 5 Nm, 10 Nm, 20 Nm, 35 Nm
Navigate on this page
Specifications
Supply voltage | 24 V AC/DC (20…28 V AC 50/60 Hz / 24…48 V DC) |
---|---|
Power consumption | 2.3 VA (1.1W - Running / 0.5W - Holding) |
Cable length | 0.9 m |
Torque | 20 Nm |
Running time, actuator | 150 s |
Auxiliary switch | No |
Angle limitation | 95 ° |
Damper shaft, round | 8…20.5mm mm |
Damper shaft, square | 8…14.5mm mm |
Damper shaft, min shaft length | 20 mm |
Max damper size (area) | 4 m² |
Termination RS485 | 120 Ω electronically switchable |
Appliance class | Class III |
---|---|
Protection class | IP54 |
Ambient humidity (non-condensing) | 0…95 % RH |
Ambient temp | -32…55 °C |
Storage temp | -32…70 °C |
Cable nominal cross section | 0.75 mm² |
Cable length extension, maximum | 300 m |
Working angle, rotation | 90 ° |