Regin
RDAS20-24C 5 Nm, 10 Nm, 20 Nm, 35 Nm
Damper acutators with Modbus RTU communication and without springreturn, 5 Nm, 10 Nm, 20 Nm, 35 Nm
Specifications
| Supply voltage | 24 V AC/DC |
|---|---|
| Power consumption | 2.3 VA (1.1W - Running / 0.5W - Holding) |
| Cable length | 0.9 m |
| Torque | 20 Nm |
| Control signal | Modbus RTU |
| Feedback signal | Modbus RTU |
| Running time, actuator | 150 s |
| Auxiliary switch | No |
| Angle limitation | 95 ° |
| Damper shaft, round | 8…20.5 mm |
| Damper shaft, square | 8…14.5 mm |
| Damper shaft, min shaft length | 20 mm |
| Max damper size (area) | 4 m² |
| Termination RS485 | 120 Ω electronically switchable |
| Appliance class | Class III |
|---|---|
| Protection class | IP54 |
| Ambient humidity (non-condensing) | 0…95 % RH |
| Storage temperature | -32…70 °C |
| Cable nominal cross section | 0.75 mm² |
| Cable length extension, maximum | 300 m |
| Working angle, rotation | 90 ° |
Software & documentation
Product sheets
Instructions
Product declarations
Other documentation