Heating system with boiler control, solar system, one domestic hot water, one mixed heating circuit and one unmixed heating circuit

Exigo heating systems: Boiler control, solar system, one domestic hot water, one mixed heating circuit and one unmixed heating circuit

The Exigo heating controllers offer a ready-made application for the control of boiler, solar system, one domestic hot water, one mixed heating circuit and one unmixed heating circuit, typically used for floor heating, radiator systems, and more. The application can be downloaded from this website, customized via the application tool and loaded into the controller.

Application 114

Downloads for Application 114

Exigo Toolbox

exigo_vido_withdisplay6.jpg

Exigo Vido 230V / 3-point
Configuration file 114
Terminal connections 114  (PDF document, 332 kB)

Description of functions

Outdoor temperature-compensated control for one radiator, convectors, or low temperature heating circuit

  • Time switch for daily, weekly, and holiday programs
  • Optimization of switch-on times
  • Caretaker function, frost protection function
  • Outdoor temperature-compensated heating circuit, with optional room-sensor for adaption
  • Min./max. limiting of supply and return temperature
  • Flash adaption
  • Support operation
  • Capacity limitation with optional energy meter
  • Cooling function - switchover based on outside temperature or digital input

Domestic hot water circuit with storage tank and load pump

  • Time switch for daily, weekly, and holiday programs
  • Anti-legionella system
  • Settable priority
  • Optional control of circulation pump
  • Capacity limitation with optional energy meter

Boiler control of boilers with modulation

  • Secondary supply temperature control with limitation of the primary return
  • Supply setpoint depending on the demand of HS, HW
  • Optional control of a pump
  • Start- stop- delay

Solar system

  • Start/Stop control of the pump
  • Conneted to the Domestic hot water storage tank

Your complete solution for heating control.

Controllers

Exigo heating controllers are controllers for heating and boiler control that make every step from installation to operation and maintenance easier than ever. Simply connect the controller, enter any settings as desired, and startup. It can be used either stand-alone or integrated into a network. It has built-in support for many different languages and is designed for mounting on a DIN rail or in a cabinet door.

Exigo Vido - Configurable 230 V heating controller

HCV191DW-2

19 IOs, 1 TCP/IP port, built-in display
HCV192DW-2

19 IOs, 1 RS485 port, 1 TCP/IP port, built-in display
HCV203DWM-2

20 IOs, 1 RS485 port, 1 TCP/IP port, 1 M-bus port, built in display

Outdoor temperature sensor

Outdoor temperature sensor with housing TG-UH3/PT1000

Outdoor sensor

Wireless outdoor temperature sensor with input for external PT1000 sensor TG-R6EW

Wireless outdoor temperature sensor equipped with a terminal for connecting an external PT1000 sensor

Supply and Return temperature sensor

Clamp-on sensor with housing TG-AH4/PT1000

Clamp-on sensor with housing

Immersion sensor with housing and well

Immersion sensor for temperature measurement in heating- or cooling applications. Available in different lengths. Insertion length 310 mm is available upon request, please contact Regin for more information. Will be replaced with TG-IH3/...

Clamp-on sensor with cable TG-A1/PT1000

Clamp-on sensor, including clamp (Ø 40 mm max.)

Storage tank temperature sensor domestic hot water

Immersion sensor with housing and well

Immersion sensor for temperature measurement in heating- or cooling applications. Available in different lengths. Insertion length 310 mm is available upon request, please contact Regin for more information. Will be replaced with TG-IH3/...

Solar collector temperature sensor

Bulb sensor, 6 mm in diameter TG-B6/PT1000

Bulb sensor

Room temperature sensor

Room sensor TG-R5/PT1000

Room sensor

Room sensor with setpoint adjustment

For room temperature measurement. Can also be used solely for setpoint adjustment.

Wireless room temperature and humidity sensor HTRT5W

Wireless room temperature and humidity sensor

Average temperature measurement

Wireless products

Valves

ZMD - 2- and 3-way control valves DN15-40, kvs 0.25-25, 5.5 mm stroke

Externally threaded control valves intended for use in heating and cooling systems together with the RVAZ4… series of electromechanical actuators. A hand wheel for manual operation is delivered with the valve.

ETRS - 3-way control valves DN15-50, kvs 0.63-40, 20 mm stroke, DZR

Valves intended for control of cold, hot and glycol-mixed water in heating, ventilation and when DZR material is a requirement (DZR = Dezincification Resistant). The valves are intended to be used together with Regin’s RVAN5 actuators. RVAN10 actuators can also be used if larger actuating force is required. The valve is supplied with a cover lid for converting the 3-way valve into a 2-way valve.

BF - 2- and 3-way control valves, DN15-50, kvs 0.63-40, 20 mm stroke

Valves designed for control of hot, cold or glycol-mixed water in heating and ventilation systems. The valves are intended for use together with Regin’s RVAN5…/RVAN10… actuators.

Actuators

Valve actuator 400 N, 5.5 mm stroke, 0...10 V or 3-position control RVAZ4-230

The RVAZ4 series of valve actuators are easy to mount and have a clear position indication which shows the position of the actuator. The actuator has manual manoeuvring. The RVAZ4 models are intended for use together with Regin's valve ranges ZTV/ZTR and ZMD. The RVAZ4L1 models can be used for different brands of valves in combination with the OVA-L1 adapter.

Valve actuators, 500-2500 N, 230 V supply voltage and 3-point control

Valve actuator for control of Regin’s range of valves. Available in models with actuator force of 500, 1000, 1800 or 2500 N. The actuators can be operated manually with the manual override mechanism on the lid. Using an adapter kit, the actuator can also be adapted for use with other valves on the market.

M-Bus meters

Compact ultrasonic energy meters

Externally threaded, compact energy meters with built-in ultrasonic flow meter, intended for heating or cooling. We offer many different options, see the product sheet for more information.

Business-driven development – our solutions

We understand your business reality and work in close collaboration with our partner network with one common goal – the goal of transforming your needs into technical solutions.

Regin solutions Building Management System

Regin Building Energy Management Solutions offer smart workflows and highly efficient maintenance from software to hardware. The solutions make way for long-term energy savings and motivated teams in every part of the organization.

Regin solutions Room

Scalable solutions for room control with everything from complete building management systems to freely programmable control systems and stand-alone products.

Regin solutions Ventilation

Our broad product range for ventilation enable flexible solutions for control of building systems of different dimensions. Our goal is to make installation, integration, monitoring and maintenance as simple and time efficient as possible. We call it Ready Steady Go!

Regin solutions Heating

We can offer optimized combinations of tailor-made products with everything you need to easily ensure cost- and time efficient control of your heating system, while not having to compromise on comfort. We give you the tools enabling rewarding business.