External display unit for EXOclever, EXOflex, Corrigo, EXOcompact, Exigo and EXOdos
This product is discontinued
This product is discontinued
ED9200 is an external, independent display and configuration unit for EXOclever, EXOflex, Corrigo, EXOcompact, Exigo or EXOdos. EXOdos, Exigo, EXOcompact C...-3 and Corrigo E...-3 supports use of ED9200 and an internal display at the same time. Earlier versions support either only an external or an internal display.
When connected to an EXOflex system, it acts as a free-standing PIFA which can be connected to a processor housing via the EFX channel. The display can be connected in two ways, either temporarily via a quick cable connection in the front panel of the Power PIFA, or permanently via screw connectors. ED9200 can be connected to an EXOflex system configured for EP9040 (LOT).
Navigate on this page
Articles
(0 st)Specifications
Power supply | With Corrigo, Exigo, EXOclever, EXOdos or EXOcompact: Internal supply, via communication cable With EXOflex: 24 V DC, via the EFX channel |
---|---|
Ambient temperature | 5...40°C |
Storage temperature | -40...+50°C |
Ambient humidity | 5...95 %RH |
Cabling | With Corrigo E...-S or EXOcompact C...-S: EK12 (3 m), EK14 (10 m) With Corrigo E...-3, EXOcompact C...-3, Exigo, EXOclever or EXOdos: EDSP-K3 (3 m), EDSP-K10 (10 m) or self-made With EXOflex: Cat 5 |
Cable type when self-made | With Corrigo, Exigo, EXOclever, EXOdos or EXOcompact: 26AWG With EXOflex: Cat 5 |
Quick connection when self-made | With Corrigo E...-3, EXOcompact C...-3, Exigo or EXOdos: 4P4C With EXOflex: USB type A male connector |
Tolerance | With Corrigo, Exigo, EXOdos or EXOcompact: - With EXOflex: 18...30 V DC |
Power consumption | With Corrigo, Exigo, EXOdos or EXOcompact: - With EXOflex: 50 mA |
Communication port | With Corrigo, Exigo, EXOdos or EXOcompact: Serial, special With EXOflex: The EFX channel |
Max. cable length | With Corrigo E…-S or EXOcompact C…-S: 10 m With Corrigo E...-3, EXOcompact C...-3, Exigo or EXOdos: 100 m With EXOflex: 200 m m |
Software requirements | With Corrigo, Exigo, EXOdos or EXOcompact: EXOreal 2.8-1-29 or later With EXOflex: EXOreal 2.8-1-26 or later |
Software & documentation
Product sheet
Instructions
Other documentation
Accessories
3 m cable for connecting an external display
10 m cable for connecting an external display
Cable for connecting ED9200 to a Corrigo E...-S EXOcompact C...-S, Exigo or EXOdos
Cable for connecting ED9200 to an EXOflex system
Cable for connecting ED9200 to an EXOflex system